A hybrid of the parachute and totally enclosed range is the closed bottom parachute lifting bag. This model suffixed with TE would be suited for situations where the lift is in shallow water, perhaps fast current, and where lift and tow is required. These lift bags can be used as an open bottomed liftbag by removing the 4″ cap from the base.
The Premier Parachute liftbags range from the 1,000 Kg (model PR1TE) to the 50,000 Kg (model PR50TE) with a safe working load of 6:1. All liftbags are supplied ready for use with test certificates and logbook. All Parachute liftbags are fitted with an inverter line attachment point which is clearly labelled.
■ Enclosed Parachute design for stable use in currents and during re-floatation, low speed tow-ing and positioning.
■ Single attachment point to the Liftbags load bearing strap arrangement.
■ Fitted with a Manual Dump Valve and Inverter Line attachment, so can be quickly converted to Open End Parachute Liftbag operation.
■ Fabricated from tough 3 ply PVC fabric with a load bearing structural polyester scrim, coated on both sides with PVC for durability & UV resistance.
■ Radio Frequency welded seams for strength and integrity.
■ Manufactured to IMCA D-016 Rev 4:2016 Independently tested to a safe working load ratio of 5:1
■ Supplied ready for use, complete with user manual and service record book.